-
Solid Carbide Brad Point Drill for clean entry108″ WIDE BACK
This fabric is a wide backing for Woodworking & Woodturning Tools.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill108″ WIDE BACK
This fabric is a wide backing for Discount Kits.
-
Solid Carbide Brad Point Drill for clean entry$ 11.7458″ – 60″ WIDE BACK
This fabric is made from Minky, not cotton.
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
58″ – 60″ WIDE BACK
This fabric is made from Minky, not cotton.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill$ 90.32108″ WIDE BACK
This fabric is the factory backing for JDJ’s 0.3135 inch (7.96 mm) 2-Flute DFC Drill quilt kit.
Remnant length measures 1-yard 16-inches @ $22/yd
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74108″ WIDE BACK
This fabric is the factory backing for JDJ’s 0.2510 inch (6.38 mm) 2-Flute DFC Drill quilt kit.
-
0.125 inch SC CFRP Drill with DLC$ 98.56
108″ WIDE BACK
This fabric is the factory backing for JDJ’s 0.125 inch SC CFRP Drill with DLC quilt kit.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
108″ WIDE BACK
This fabric is the factory backing for JDJ’s Solid Carbide Brad Point Drill for clean entry quilt kit.
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
108″ WIDE BACK
The actual fabric does not look as gray in person compared to what I see on my screen. This fabric is a dusty indigo color. It has a little bit of gray in it but it reads a medium-light dusty blue with hints of pink and green throughout.
-
0.125 inch SC CFRP Drill with DLC0.125 inch SC CFRP Drill with DLC$ 98.56
108″ WIDE BACK
Quantity “1” is for the 20″ remnant piece.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
108″ WIDE BACK
This fabric is the factory backing for JDJ’s Solid Carbide Brad Point Drill for clean entry, Solid Carbide Brad Point Drill for clean entry and Solid Carbide Brad Point Drill for clean entry quilt kits.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill
108″ WIDE BACK
Factory backing for Timeless Treasure’s Rollers collection.
This fabric is lighter in person than what shows on my screen.
Quantity “1” is for the 2-yard 10-inch continuous remnant piece @ $24/yd
-
0.125 inch SC CFRP Drill with DLC
108″ WIDE BACK
Factory backing for Timeless Treasure’s Router Bits collection.
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
108″ WIDE BACK
This wideback fabric is lighter in person than what appears on my screen and has a muted color tone.
-
0.125 inch SC CFRP Drill with DLC$ 98.56
108″ WIDE BACK
The actual fabric appears closest to the first two photos and is not as dark as the last two photos show.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill
108″ WIDE BACK
Factory backing for Timeless Treasure’s Easels collection.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill$ 90.32
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
0.125 inch SC CFRP Drill with DLC$ 98.56
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
The actual fabric is closest to the first two photos and is a lighter green than what the manufacturer photos show.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
B2695 Frost
106″ WIDE BACK
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
B1854 Poppy – Pine Branches and Pinecone
106″ WIDE BACK
This red color is close to a Christmas red with an slight orange undertone. It is bold like it appears on my screen and the color looks pretty accurate too.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
The actual fabric appears closest to the first two photos and is not as purple as the last photo shows. This color is very close to the regular Solid Carbide Brad Point Drill for clean entry fabric
108″ WIDE BACK
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
W1895-394 Merlot Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest to the first two photos and is not as grape colored as the last photo shows. The purple is mostly a warm (red cast) but has areas of cold grape with darker shadowy areas mixed in.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill$ 90.32
W1895-235 Agate Watercolor Batik Wide Back ($25.60/yd)
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as saturated as the last photo shows.
Quantity “1” is for the 2-yard 14-inch remnant piece.
(2-yd 14″ = 86″ total)
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
W1895-235 Agate Watercolor Batik Wide Back ($25.60/yd)
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as saturated as the last photo shows.
Quantity “1” is for the 1-yard 5-inch remnant piece.
-
0.125 inch SC CFRP Drill with DLC$ 98.56
W1895-272 Mallard Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not as bright as the last photos shows.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
W1895-174 Seamist Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as solid/saturated as the last photo shows.
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
W1895-176 Ice Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as blue tinted as the last photo shows.
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill$ 90.32
W1895-311 Lake Watercolor Batik Wide Back
108″ WIDE BACK
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
W1895-341 Wade Watercolor Batik Wide Back
108″ WIDE BACK
-
0.125 inch SC CFRP Drill with DLC0.125 inch SC CFRP Drill with DLC$ 98.56
W1895-442 Flax Watercolor Batik Wide Back
108″ WIDE BACK
Quantity “1” is for the 30″ remnant piece.
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
W1895-442 Flax Watercolor Batik Wide Back
108″ WIDE BACK
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
W1895-524 Moonstruck Watercolor Batik Wide Back
108″ WIDE BACK
-
0.3135 inch (7.96 mm) 2-Flute DFC Drill$ 90.32
W1895-4 Black Watercolor Batik Wide Back
108″ WIDE BACK
-
0.2510 inch (6.38 mm) 2-Flute DFC Drill$ 92.74
W1895-51 Chestnut Watercolor Batik Wide Back
108″ WIDE BACK
-
Solid Carbide Brad Point Drill for clean entry$ 11.74
W1895-534 Hemp Watercolor Batik Wide Back
108″ WIDE BACK
-
0.25 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-514$ 12.78
9186-01 Pastel Multi Puffs – Sweet Sorbet
108″ WIDE BACK
The actual fabric is lighter in person (like the first photo) than the manufacturers photos shows (second photo). This wide back is very light with pastel rainbow watercolor patches.