-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718108″ WIDE BACK
This fabric is a wide backing for Woodworking & Woodturning Tools.
-
1/4 inch SC 2-Flute Compression Max Wear108″ WIDE BACK
This fabric is a wide backing for Arrangements.
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.2558″ – 60″ WIDE BACK
This fabric is made from Minky, not cotton.
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
58″ – 60″ WIDE BACK
This fabric is made from Minky, not cotton.
-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718$ 10.89108″ WIDE BACK
This fabric is the factory backing for JDJ’s 5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718 quilt kit.
Remnant length measures 1-yard 16-inches @ $22/yd
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532$ 34.38108″ WIDE BACK
This fabric is the factory backing for JDJ’s 1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532 quilt kit.
-
1/4 inch SC 1-Flute Upcut Super “O”$ 97.52108″ WIDE BACK
This fabric is the factory backing for JDJ’s 1/4 inch SC 1-Flute Upcut Super “O” quilt kit.
-
3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C$ 93.88
108″ WIDE BACK
This fabric is the factory backing for JDJ’s 3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C quilt kit.
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
108″ WIDE BACK
The actual fabric does not look as gray in person compared to what I see on my screen. This fabric is a dusty indigo color. It has a little bit of gray in it but it reads a medium-light dusty blue with hints of pink and green throughout.
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-5110.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.25
108″ WIDE BACK
Quantity “1” is for the 20″ remnant piece.
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
108″ WIDE BACK
This fabric is the factory backing for JDJ’s 5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026, 5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026 and 5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026 quilt kits.
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532
108″ WIDE BACK
Factory backing for Timeless Treasure’s Rollers collection.
This fabric is lighter in person than what shows on my screen.
Quantity “1” is for the 2-yard 10-inch continuous remnant piece @ $24/yd
-
3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C
108″ WIDE BACK
Factory backing for Timeless Treasure’s Router Bits collection.
-
$ 34.43
-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718$ 10.89
108″ WIDE BACK
This wideback fabric is lighter in person than what appears on my screen and has a muted color tone.
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532$ 34.38
108″ WIDE BACK
The actual fabric appears closest to the first two photos and is not as dark as the last two photos show.
-
1/4 inch SC 2-Flute Compression Max Wear
108″ WIDE BACK
Factory backing for Timeless Treasure’s Easels collection.
-
$ 34.43
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.25
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718$ 10.89
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532$ 34.38
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
1/4 inch SC 1-Flute Upcut Super “O”$ 97.52
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
The actual fabric is closest to the first two photos and is a lighter green than what the manufacturer photos show.
-
3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C$ 93.88
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.25
B2739 Rainbow Fireworks
106″ WIDE BACK
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
B1854 Poppy – Pine Branches and Pinecone
106″ WIDE BACK
This red color is close to a Christmas red with an slight orange undertone. It is bold like it appears on my screen and the color looks pretty accurate too.
-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718$ 10.89
B1200 Moss – Bohemian Leaves
106″ WIDE BACK
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532$ 34.38
The actual fabric appears closest to the first two photos and is not as purple as the last photo shows. This color is very close to the regular 1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532 fabric
108″ WIDE BACK
-
1/4 inch SC 1-Flute Upcut Super “O”$ 97.52
W1895-394 Merlot Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest to the first two photos and is not as grape colored as the last photo shows. The purple is mostly a warm (red cast) but has areas of cold grape with darker shadowy areas mixed in.
-
3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C$ 93.88
W1895-235 Agate Watercolor Batik Wide Back ($25.60/yd)
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as saturated as the last photo shows.
Quantity “1” is for the 2-yard 14-inch remnant piece.
(2-yd 14″ = 86″ total)
-
1/4 inch SC 2-Flute Compression Max Wear$ 91.59W1895-235 Agate Watercolor Batik Wide Back ($25.60/yd)
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as saturated as the last photo shows.
Quantity “1” is for the 1-yard 5-inch remnant piece.
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.25
W1895-272 Mallard Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not as bright as the last photos shows.
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
W1895-174 Seamist Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as solid/saturated as the last photo shows.
-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718$ 10.89
W1895-176 Ice Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as blue tinted as the last photo shows.
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532$ 34.38
W1895-311 Lake Watercolor Batik Wide Back
108″ WIDE BACK
-
3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C$ 93.88
W1895-442 Flax Watercolor Batik Wide Back
108″ WIDE BACK
Quantity “1” is for the 30″ remnant piece.
-
1/4 inch SC 2-Flute Compression Max Wear$ 91.59
W1895-442 Flax Watercolor Batik Wide Back
108″ WIDE BACK
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.25
W1895-524 Moonstruck Watercolor Batik Wide Back
108″ WIDE BACK
-
5 mm Solid Carbide Brad Point Drill for clean entry — Official LMT Onsrud 72-026$ 34.43
W1895-4 Black Watercolor Batik Wide Back
108″ WIDE BACK
-
5 mm High-Speed Steel Drill for through-drilling holes in wood — Official LMT Onsrud 70-718$ 10.89
W1895-51 Chestnut Watercolor Batik Wide Back
108″ WIDE BACK
-
1/2 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-532$ 34.38
W1895-179 Toast Watercolor Batik Wide Back
108″ WIDE BACK
-
3/8 inch Solid Carbide 2-Flute Compression Spiral for plywood — Official LMT Onsrud 60-123C$ 93.88
9186-01 Pastel Multi Puffs – Sweet Sorbet
108″ WIDE BACK
The actual fabric is lighter in person (like the first photo) than the manufacturers photos shows (second photo). This wide back is very light with pastel rainbow watercolor patches.
-
0.203125 inch Solid Carbide Drill for through-drilling holes in wood — Official LMT Onsrud 70-511$ 11.25
B5029 Windsong – Autumn Leaves
108″ WIDE BACK