-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18108″ WIDE BACK
This fabric is a wide backing for Woodworking & Woodturning Tools.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18
108″ WIDE BACK
This fabric is a wide backing for Discount Kits.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18
108″ WIDE BACK
This fabric is a wide backing for Arrangements.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
58″ – 60″ WIDE BACK
This fabric is made from Minky, not cotton.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.7658″ – 60″ WIDE BACK
This fabric is made from Minky, not cotton.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
108″ WIDE BACK
This fabric is the factory backing for JDJ’s Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25 quilt kit.
Remnant length measures 1-yard 16-inches @ $22/yd
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
108″ WIDE BACK
This fabric is the factory backing for JDJ’s 3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18 quilt kit.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
108″ WIDE BACK
This fabric is the factory backing for JDJ’s Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25 quilt kit.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
108″ WIDE BACK
This fabric is the factory backing for JDJ’s 3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18 quilt kit.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
108″ WIDE BACK
The actual fabric does not look as gray in person compared to what I see on my screen. This fabric is a dusty indigo color. It has a little bit of gray in it but it reads a medium-light dusty blue with hints of pink and green throughout.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
108″ WIDE BACK
Quantity “1” is for the 20″ remnant piece.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
108″ WIDE BACK
This fabric is the factory backing for JDJ’s 3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18, 3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18 and 3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18 quilt kits.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18
108″ WIDE BACK
Factory backing for Timeless Treasure’s Rollers collection.
This fabric is lighter in person than what shows on my screen.
Quantity “1” is for the 2-yard 10-inch continuous remnant piece @ $24/yd
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18
108″ WIDE BACK
Factory backing for Timeless Treasure’s Router Bits collection.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
108″ WIDE BACK
This wideback fabric is lighter in person than what appears on my screen and has a muted color tone.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
108″ WIDE BACK
The actual fabric appears closest to the first two photos and is not as dark as the last two photos show.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18
108″ WIDE BACK
Factory backing for Timeless Treasure’s Easels collection.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
The actual fabric is closest to the first two photos and is a lighter green than what the manufacturer photos show.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
116″ WIDE BACK
NOTE: This fabric is advertised as 107″/108″ from Riley Black. However, when I actually measure it in person, it’s much closer to 116″ WOF.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
B2695 Frost
106″ WIDE BACK
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
B2739 Rainbow Fireworks
106″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
B1854 Poppy – Pine Branches and Pinecone
106″ WIDE BACK
This red color is close to a Christmas red with an slight orange undertone. It is bold like it appears on my screen and the color looks pretty accurate too.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
B1200 Moss – Bohemian Leaves
106″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
The actual fabric appears closest to the first two photos and is not as purple as the last photo shows. This color is very close to the regular 3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18 fabric
108″ WIDE BACK
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-394 Merlot Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest to the first two photos and is not as grape colored as the last photo shows. The purple is mostly a warm (red cast) but has areas of cold grape with darker shadowy areas mixed in.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-235 Agate Watercolor Batik Wide Back ($25.60/yd)
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as saturated as the last photo shows.
Quantity “1” is for the 2-yard 14-inch remnant piece.
(2-yd 14″ = 86″ total)
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-235 Agate Watercolor Batik Wide Back ($25.60/yd)
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as saturated as the last photo shows.
Quantity “1” is for the 1-yard 5-inch remnant piece.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-272 Mallard Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not as bright as the last photos shows.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-174 Seamist Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as solid/saturated as the last photo shows.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-176 Ice Watercolor Batik Wide Back
108″ WIDE BACK
The actual fabric appears closest in color to the first two photos and is not quite as blue tinted as the last photo shows.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-311 Lake Watercolor Batik Wide Back
108″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-341 Wade Watercolor Batik Wide Back
108″ WIDE BACK
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-442 Flax Watercolor Batik Wide Back
108″ WIDE BACK
Quantity “1” is for the 30″ remnant piece.
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-442 Flax Watercolor Batik Wide Back
108″ WIDE BACK
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-524 Moonstruck Watercolor Batik Wide Back
108″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-4 Black Watercolor Batik Wide Back
108″ WIDE BACK
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-51 Chestnut Watercolor Batik Wide Back
108″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
W1895-179 Toast Watercolor Batik Wide Back
108″ WIDE BACK
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
W1895-534 Hemp Watercolor Batik Wide Back
108″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
9186-01 Pastel Multi Puffs – Sweet Sorbet
108″ WIDE BACK
The actual fabric is lighter in person (like the first photo) than the manufacturers photos shows (second photo). This wide back is very light with pastel rainbow watercolor patches.
-
Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-25$ 45.54
B3094 Smile – Cute Vine Leaves
108″ WIDE BACK
-
3/4 inch Solid Carbide Collet for tool holding on CNC routers and machining centers — Official LMT Onsrud 33-18$ 9.76
B5029 Windsong – Autumn Leaves
108″ WIDE BACK